– Zoom network connection failed error code 1010 – none:

Looking for:

– Zoom network connection failed error code 1010 – none:

Click here to ENTER


I am behind a corporate proxy configured at os level. I tried to ignore explicitly the range of ips that wsl is using but it doesn’t work either. This did the job for me: I closed both Linux WSL tab and VsCode, them I opened a command prompt with admin privileges and used this: wsl –shutdown After that I opened my linux tab again, type “code. Thanks a lot for your response, and it would fix the issue temporarily, and after one or 2 restarts of my containers the communication would break again, also debug will work fine, then go totally crazy, I created a separate ticket for this particular issue.

Updating Remote-WSL to 0. Since the latest Remote-WSL extension 0. However, does anyone notice about slow start?

In my machine, VSCode take long time to start. Or should we create a new issue. Just run into the same issue with 0. Only way to fix this for me is to reinstall the code server. Then it starts to work again. This issue still happens to me with the latest version 1. However, I found that setting Http: Proxy Support to override without proxy exception, or extension config changes now seems to work as well. Please create new issues.

It’s complicated to keep things separate Please always describe if you are behind a proxy, if you have “remote. After this it worked correctly. This is all with 1. Hi, after updating to the Remote-WSL extension 0. Also would like to add that after the update my settings. Skip to content. Star k.

New issue. Jump to bottom. Copy link. VSCode Version: 1. NormandoHall mentioned this issue Feb 5, Not run on newly VS Code 1. Multiple people in our company are seeing the same issue. Only useful logs I see are from the Log Window Output: [ Multi distro support: available. WSL path support: enabled [ UTF-8″, [ You can also customize emojisense settings per language.

Recommended to disable editor. Example: ‘vscode. Currently only applies to single container and not Docker Compose configurations. This overrides the common setting for the dotfiles repository. This overrides the common setting for the dotfiles install command. This overrides the common setting for the dotfiles target path.

Useful for connecting to hosts which have issues with locking, such as hosts with a home directory using NFS or another distributed filesystem. When this is used, a password only needs to be entered once for each remote window. Add the names of windows remotes to this list. This makes it faster to open new windows and reduces the number of times a password needs to be entered.

This setting disables that warning. Note – this setting will soon be required when useLocalServer is disabled, so it is currently being autopopulated for successful connections, but is not currently used. Only valid for Linux and macOS remotes. Requires OpenSSH 6. If not set, file events are used. Polling is less performant but fixes the WSL1 issue that folders can not be renamed when watched.

WSL2 does not have that problem and thus is not affected by this setting. MSC”, [ UTF-8 [ Not found. Where I can download 1. Thanks NormandoHall You can get the old version here. Isolated to: No issue when I remove the proxy setting from the vscode settings Issue appears when adding a proxy value to vscode settings.

SchoofsKelvin mentioned this issue Feb 5, Latest VSC update 1. I tried ignore wsl’s IP in proxy config but it can’t connect anyway. I’ve got the exact same issue here with version 1. Configuring the http proxy support to off doesn’t change anything for me.

Does the pinging of the IP succeed This is my log with “remote. Same issue with plain remote access. Related to the sftp extension.

In my computer, the loading speed is very slow. Alban mentioned this issue Feb 24, Virtual backgrounds still not working for me. Every time I enable them my camera freezes and unfreezes if I disable them. Hey everyone. I’ve tried a few different ways but couldn’t get it to work. I’m trying to disable login with google, facebook, sso and a few other settings. The configs for Windows are. Restart zoom and viola! Backgrounds work flawlessly again. I tried this with blur, default backgrounds, and custom backgrounds.

There are other issues with audio on the latest version so you might want to downgrade as well. Virtual Backgrounds Zoom has a fix for virtual backgrounds not working listed on their website , although I cannot find the ZoomMedia. Maybe this is already enabled and I have the same problem as others have mentioned, but I have no way to confirm.

Does anyone know where this file would be? Thanks in advance. The version here 5. It may be that 5. After the latest 5. It can see my microphone, but the level bar in the audio settings doesn’t move as I speak and no one can hear me. Other applications and pavucontrol can use and see my microphone without problems. I fixed this by downgrading to 5.

Did anybody manage to get screensharing working with sway? I get the message that screen sharing is only supported on [lots of distros], arch I am using xdg-desktop-portal with the xdg-desktop-portal-wlr backend. Thanks for pointing this out! Coelacanthus Can you please file an issue upstream so that zoom updates their package dependencies accordingly?

It is hard for me to reason about the blackbox that zoom is especially considering that upstream says ibus is a hard dependency. So you can remove ibus from a strong dependency, or move it to an optional dependency, and add fcitx and fcitx5 as optional dependencies at the same time.

Is there a specific reason why you think otherwise? If so, try turning that off and see if your camera works again. For me, it seems to be hit-or-miss since the 5.

Sometimes I can use the blur background feature, sometimes it exhibits symptoms similar to you black screen, frozen image. After updating pacman -Syu and updating zoom , my webcam stopped working in zoom. The webcam works fine for other applications, zoom detects it but then shows a black picture and picks up the microphone of the webcam.

It is a Logitech, Inc. HD Pro Webcam C Has anybody else encountered a similar problem? I have tried –no-sandbox , but with the same crash. For anyone having the same virtual background not working problem, try opening zoom client before clicking on the join room. I found out that this way the virtual backgrounds work and if I join the link directly the camera doesn’t work with virtual backgrounds. Crashes for me using Nvidia and Wayland.

Adding –no-sandbox fixes the issue. Maybe this can help someone. Both packages provide the exact same files after all!

Sharing screen doesn’t crash anymore on 5. I installed the package provided from the zoom website, and now the blurring works again. Since there is no source code available, it really just repackages what is available upstream.

I would suggest filing a bug upstream to let the zoom folks know about your problem. I’m wondering if that is an issue from zoom or from the package. I have the same issue but the zoom app also doesn’t use the correct icon anymore, I might try the flatpak to see if it fixes this. Btw I’m on gnome I have exactly the same problem krmath is having: enabling the virtual background without a green screen results in either a frozen or a completely black video feed.

I am running Zoom version 5. Any solution or workaround would be very welcome. I have a thinkpad T and T that I have used for work, including Zoom meetings, for a while now, and have had no issues until over the past weekend, which was the first time I used Zoom since the lastest update 22 March.

Using either laptop, I would get a black screen when unmuting my video feed to be clear, it is my video feed that is completely black; not my actual screen.

When I open up the video settings, it fills in a still snapshot from the webcam, but not a live feed. Closing and reopening the settings refreshes the still image. After a bit of experimentation, I figured out that the video feed works fine when disabling the virtual background. I can also use the virtual background with the “I have a green screen” enabled and get a live feed, but since I don’t actually have a green screen, the background image is not properly applied.

Again, I have the same behavior on multiple laptops, and Zoom was working fine prior to the past update on both laptops. I was able to get Zoom to launch using the –no-sandbox option, but I had problems getting links to open in Zoom still.

You can probably also fix it by changing the sandbox binary to be SUID root, which is probably the better solution here. After upgrading to version 5. Running it from the terminal prints no output and just exits after a second or two. The previous version 5. The camera was working fine after I turned the blur off. I had to downgrade to zoom 5.

Downgrading to 5. I can’t speak much for screen sharing as I haven’t really tried it. But 5. The light on my laptop indicates I’m sharing video, but nothing shows up. Reverting back to 5. Anyone know if 5. I am sure they are happy to fix it for all Linux distributions. I can confirm as well that screen shares are crashing on the 5. Found out the hard way – during a call today. If anyone hears of a fix, please post. It also seems to be worse with more people in the call.

But it will also sometimes crash with one other participant. I downgraded to 5. Hi, since the last upgrade, zoom frequently crashes when I try to do screen sharing. Does someone else have the same problem? It seems to happen more frequently if more people are in the call. Hello everyone. It seems that I’ve lost the ability of sharing the screen in zoom. From what I’m reading it may be a problem of Gnome but I wanted to at least point this out here. Is anyone experiencing this issue?

Zoom is definitely the problem. I have tried using the Zoom Test meeting on two different Debian based systems. The test meeting crashed on both devices. Fwiw I submitted a zoom bug report after trying another clean build and getting the same issue. Hopefully it might get fixed I am using EndeavourOS. My headphones are plugged in using the separate mini stereo jacks for speakers and microphone. Rebooting and rebooting with mic not plugged in did not remedy the situation for me.

Output of “inxi -A”. After the meeting I went to the Zoom Test site. I could not do any further troubleshooting because the Zoom crashed after when I attempted start a test Zoom meeting. No error messages were displayed. It doesn’t appear to happen if I join with my mic plugged in, but it will happen if I disconnect my mic during the call or join without a mic.

The only remedy I found is to reboot. Exiting zoom and restarting it yields the same unending cascade of notifications. These cascading notifications prevented clicking any zoom buttons and continued after using keyboard shortcuts to exit the meeting. For me they occurred if I enter a meeting with the mic not set up e. I forgot to plug it in. Zoom works as normal provided my mic is connected and configured in my system prior to joining a call.

Weirdly, I don’t get any notifications if I disconnect the mic during a zoom call. I sent them a support request just now, asking here because not sure their support will actually know if there is anything under the hood.

AchmadFathoni These dependencies are not required because they are pre-packaged with zoom. Since no source code is available for zoom, this is a plain re-packaging of the original zoom package. The package does not link against the system Qt but instead provides its own versions of these libraries.

Looking at zoom binary dynamic link, it seems that zoom needs qtd and qt5-gamepad as dependency. Then we need just ignore that, as suggested here. This is a binary package with no source code provided whatsoever. This in itself is a bad situation but unfortunately the one we are in.

Furthermore, most dependencies are bundled within the package itself since zoom requires old and outdated versions of many libraries. Please investigate and think about the output of the commands you are posting a bit more before coming up with conclusions. I hope this can be fixed. Below is the verbosed output of missing libraries locations.

So take care and be sure to set it to false again when you don’t need it anymore. I have an issue with my address mail, I can’t put it in the field. I tested writing, deleting characters and Ctrl-V. Maybe it doesn’t fit the regex, my address is formatted like: name. Thanks for the offer though. I could solve my problem, for some reason the autoadjust for the microphone volume has put the volume of the USB webcam’s microphone to zero So either Zoom fixes it on their side, or as a workaround set global.

After some update Zoom stopped recognizing the microphone from the USB webcam. In other applications the microphone works, Pulseaudio settings also show the input signal correctly. I tried the solution from the pinned comment, that is, setting system. Zoom works with an old analog mic though.

Zoom under Wayland can only share the entire screen or the whiteboard according to the Zoom official support. Does anyone know a fix to this? I’m in agreement with openmindead regarding the ibus requirement. As it is not explicitly required by Zoom for functionality only specified as such in the.

I’ve also been running Zoom with xwayland for over a year now – their Wayland support just crashes too easily. At every major release I try Wayland again, and it just crashes again :. I’ve fixed many Wayland related crashes by changing Zoom to use X If the host ever went offline, the problem would clear from that point onwards. The last update cleared the issue. Thanks again. As hv15 says, changing the line system.

However, I cannot use bluetooth headphones, it requires bluetooth to connect for alsa using bluez-alsa package and make necessary configurations which results not to use pipewire for bluetooth. Speaking of ibus dependency: fcitx5 works with Zoom just fine. So there’s no need to force ibus to be installed as Zoom’s dependency. Those who use it already have it installed right? And as of now those who don’t use it just get a bunch of extra useless packages.

I looked through some of the recent comments and didn’t see anything about this.. It is driving me absolutely crazy. I am using zoom-firejail..

I have been patiently waiting for a new release to free me from the current situation! Zoom 5. When this issue arose, the checksum could have just been updated for the new binary , along with a pkgrel bump, and all of this drama would have been averted. Marking it version 5. I don’t think many who have already built this will care about doing so again, most are going to be using AUR helpers anyway that will just take care of it. But the upstream binary package has changed, thus everybody should update!

It is odd and undesirable when upstream packagers do this but it is not unprecedented and in cases where I have seen this before, the AUR maintainer just bumps the pkgrel without any of the ongoing confusion and dialog we have seen here.

The current version number is not the issue here! Zoom released a new binary package under the same seemingly unique URL thereby breaking this package. To correct for this I introduced an artificial version bump. During this step I did a mistake in updating the pkgver and appended an a instead of an.

Thus, I did not force a rebuild but actually decreased the version number. For the time being please update manually e. The seemingly lower version is actually the most recent version.

Note, while I could still “fix” this by appending the. In my opinion this bother people unnecessarily who already put in the effort. There is a general issue of the upstream releases updates without changing the build number and there is a current temporary issue in that this a business missed the necessary segment separator. Your scheme would be a viable scheme, but it would not solve the problem that upstream keeps changing their package without changing versions.

Neither the “5. In other words following your scheme would still have required a. There are ways out of the current mishapp with a instead of the.

Just “downgrade” your package to 5. The next time around I doubt edh will make the same mistake. But I still don’t understand what the issue is here. I am currently running zoom 5. Current build is Would it not be possible to change the versioning scheme you’re using to change the version number from 5. Then an update to the new build version of 5. Instead I see this:. Sorry for setting the “outdated” flag. I only now read all the discussion : For reference in case someone stumbles upon this: Uninstalling zoom 5.

I am aware of the problem. Please read the previous comments. This issue has been extensively discussed. Touching pkgrel is the wrong thing to do here in my opinion. For example, 1.

For AUR helpers like yay, this will cause them to see the “new” version as a downgrade and not upgrade them. I think a better workaround would be to just bump pkgrel.

That way it’s treated as a newer package, and the upstream version number is kept as-is. That might help Also combining setting and not setting the audio type with those other combinations With pulseaudio-alsa, no matter your app uses alsa backend, it’ll be proxied to pulseaudio. Zoom does work great without pulse, when you do not have pulse at all in your system. As an alterantive to plain alsa, and pulse, have you tried using pipewire instead?

Perhaps with pipewire-pulse and pipewire-alsa, or a combination of them? Zoom is proprietary, so perhaps getting help from them, or a zoom hosted forum might also help get some answers. Proprietary apps are really annoying. I only use zoom given I have no choice at work, :. Ok, so I’m pretty late to bring this up. And from the comments, a few others have had the same or similar issue. But I’m going to be more specific and bring it up again, cause the pinned solution doesn’t seem to work for me.

I use pulseaudio for sound. I tried changing system. I don’t know if there’s any other fix, I tried waiting for an update, but no difference, and I’m surely now getting desperate. Do I need to change from pulse audio to something else entirely? Any chance we could use that URL scheme for download going forward in order to avoid the version number issues?

Thanks for your patience. I didn’t realise they reused the same build number in addition to version number which is completely ridiculous – why even bother having a build number? See for example the last commit. The version nor the build changed, the binary file though did change.

Now, there are only two options: I force an upgrade for every user by artificially changing the version to 5. This would require users who have already updated to reinstall the package without an actual need.

The second option is to just wait and endure the current state of affairs until a new release is made. As of now, I am sticking to the second option. This has been covered at length in previous comments but it cannot be corrected until the next release upstream. Zoom release the same version twice with a silent update using the same version.

No, using pkgrel to indicate this would not have been correct. The use of a to indicate this was correct and standard procedure. The only mistake was that it should have been separated from the version as its own segment. The maintainer has already indicated they will get that right next time, but it isn’t possible to fix this time without introducing an obnoxious epoch version that will never go away.

The versioning seems wrong, should probably be 5. Breaks pacman upgrade check see below. Same format is followed by the latest. I should have checked that in advance. Right, I will do that next time as well. Wanting to verify if other Linux users have this issue: When I try to set an alternative host for a scheduled meeting, it appears no email is forwarded to the recipients. Neither do they gain host-privileges when connecting to the meeting.

Is this feature disabled on Linux? That upstream package lists ibus as a dependency. Not obvious to me why it is a dependency, but generally I believe the upstream developers when they say something is a dependency. The current version saves the source with an extra a in there that does not show in your error message.

Please update to the latest commit of this packaging repository. Hello, are there reason for ibus being dependency?

It is one of the input methods, not needed for people who use another ime. I maintain the rememberthemilk package and they pull the same crap of updating the binary without changing the version number. I want to say that I think your approach was almost spot on and what I am going to do in the future. Bumping the pkgrel for a change in the upstream binary is not what pkgrel is designed for while updating the pkgver to trigger a new download and rebuild is the way to go.

Had you set pkgver to be 5. Of course no one should expect a maintainer to nail all the nuances of vercmp and the package build process every time. Again, thanks for maintaining this package. Sorry, I forgot about the vercmp specifics here. I indeed intended to make the new version large than the one before. However, since the checksum was in a sense outdated, users who did not adapt the PKGBUILD could not upgrade anyways and those who did, do not need upgrade now.

No, this is simply not what pkgrel is for. See aditya comment on the definition of pkgrel. The reason why I was reluctant to change the pkgrel is because it does not force users to re-download the binary file. Of course I could have included pkgrel in the target filename but this did not seem proper to me. Adding that ‘a’ doesn’t trigger an update.

Upstream has published a new binary so I would say an update is required, i. It is zoom that pushed a new binary package to the same URL. The release number. This is usually a positive integer number that allows to differentiate between consecutive builds of the same version of a package. When a new version of the software is released, this value must be reset to 1. In exceptional cases other formats can be found in use, such as major.

The checksum of the last release 5. The sha for the file at the moment is 7c34f2facedfedba4fabf55f1ebbc9bf54cd3aab7ea0aee2cece4af7fcd23f6e03c4be. The Zoom desktop client isn’t calling ::UnInhibit method against org.

The call to ::Inhibit is working fine when the video starts. For services that observe the DBus calls to org. ScreenSaver ie. I submitted a support request to Zoom, but I thought of mentioning it here in-case someone had some kind of work-around that I’m not aware of. I do have a work-around; it’s terminating the Zoom Desktop Client every-time I’m done with a conference call :.

I found a workaround for my intermittent “Can’t hear others on first join”. And it is that if I go to “video settings” on the bottom left video dropdown, then go to Audio section and “test speaker”, then I instantly hear the other participants without having to leave and re-join the meeting. After installing the pkg. AUR Zoom works now. Every time I used Zoom on sway, it crashed shortly after I joined the call. This seems to have been fixed after I downloaded a deb version of Zoom and debtapped it.

Anyone have luck with zoom on gnome and wayland? Whenever I use zoom in a gnome wayland session, I get noticeable slowdowns that only disappear when I go to gnome activities view. About 1 out of 15 meeting joins, I can’t hear anyone, but they can hear me.

Every time, I just have to say “Linux bug, rejoining” then leave the meeting not exit zoom though and rejoin and it works fine. Anyone else have this issue? Nearly every time I login via Google with Zoom, it just hangs. Then I close it and relaunch Zoom, and login again and it is instant. Anyone else hit this issue, I wonder if I should report to Zoom. If you have audio problems with pulseaudio, try replacing it with pipewire instead, it worked for me. I will remove it from the dependency array of it is not listed as hard dependency by upstream.

Please remove ibus as dependency from this package! For fcitx users: sudo pacman -Rdd ibus as it conflicts with your fcitx. I have problems with annotating screen sharings of others for a few months now. The whole second window with the screen share goes black, an overlay which only goes away if the second window disappears e. I had a problem with Zoom crashing when the electron [1] package was missing, after installing this, Zoom does not crash anymore.

Like hv15 commented, I tried pipewire instead of alsa and now I can use my bluetooth earphones with mic. Most Zoom functionality is good for me, but I have a persistent issue where participants cannot see annotations when I’m the one sharing. To make it easier for users to circumvent using pulseaudio, I moved it to the list of optional dependencies. Is pulseaudio-alsa really an optional dependency, now that zoom natively supports pulseaudio?

What’s with that? I did so to not force people who already pruned their cache to perform a “fake” update. I renamed the source files so that AUR helpers don’t get confused.

One shouldn’t need to do anything anymore. I don’t have anything like that in my yay cache folder, should I be looking somewhere else? Zoom messed up their download portal and for a moment advertised old versions under a new name.

As workaround i build the package via debtap from. Hope it’s helpfull. You should update the shasum to the new value: bdcbefcfcf7a4ddc9dbdef12eb1b39fcc92dbbcb9e8c24e9f5a3dbcd6c Currently a wrong one is listed in the PKGBUILD.

Downloading the package via their website is broken too. Sorry for unflagging the package that quickly. We will have to wait for zoom to fix this issue.

It appears there’s a problem with the upstream 5. As a result, this AUR package 5. Latest version of zoom makes awesome wm crash. It happens specially when I change it from floating to tiling or full screen and vice versa. With the appImage same version it doesn’t happen. It could be some libraries. I’ll add it with the next release. Given that most users will have pulseaudio or gtk3 installed, they will not notice that this dependency is missing.

Missing libxtst as dependency. I don’t know when it was added, but the package failed to run on a clean chroot. Screen sharing after the latest Zoom update is majorly affected.

The upload frame-rate is stuck precisely at 1 fps, and does not increase regardless of internet speed or screen resolution. I would appreciate any ideas that people might have how to solve it. Perhaps there’s a way to downgrade Zoom? I had problems with microphone being jittery, to a degree that it was hardly usable. Bypassing PulseEffects didn’t work, though. What helped me was installing pipewire-alsa and setting system.

Now the mic is usable again :. Using “GNOME on Xorg” I suddenly found out that I can’t share screen neither full desktop nor specific window, in both cases only the wallpaper was seen zooming in and out or with glitching window top bar. Hi all, I just rebooted my machine after updating and zoom is majorly glitching out. Specifically clicking on buttons in the GUI doesn’t update the window unless I click on the profile or resize the window.

I’m using i3 so perhaps that’s related. I suspect it’s due to updates in either the kernel or other dependencies, as downgrading zoom to the original version does nothing. Has anyone else encountered this problem? Please check your network configuration! My issue right now is ever since 5. Seems the two updates after have not addressed.

Any advice from anyone else that has ran into this? What I have done in the meantime is downgrade back to 5. Since the last 5. Anyone got this too? Is anyone able to use the “raise hand” function? Deselecting “Automatically join audio by computer when joining a meeting” in the Zoom settings seems to help as well with the issue of getting stuck on connecting when joining meetings.

Does screen sharing work for anybody under Wayland? Supposedly, it is supported on Arch Linux but when I try to share my screen all I get is an message telling me that it only works for supported OSes Fedore, Ubuntu,..

Arch Linux.. Looks like you are using a helper, try to build manually. Ie makepkg -crs then pacman -U. When I try to install the package I get : error: ‘zoom So I pacman -U one and got it installed. Why is there two of them? I have the exact same problem as smolloy and it’s driving me crazy or better, my colleagues. I also start to speak and it’s very low and then it increases the volume. I’ve already tried to change the config to system.

For now I’ve “fixed” it by using the web version and keeping the native client open at the same time to see the gallery, but that’s quite impractical. Changing the line system. Now Zoom doesn’t get stuck on connecting and the audio doesn’t get very quiet when joining breakout rooms. Tam I’m not sure if you’ve tried this, but I had to make sure no other application had any hold over alsa before starting the zoom session.

In my case, it was a jack server. Does anyone have a good workflow for helping zoom and jackd share alsa? Right now I’m closing my jack server and every program connected to it before each zoom session. Any insight would be greatly appreciated! Does anyone have a reliable fix for this? It’s really annoying and none of the solutions in the comments have worked for me. Hi all, I just found out from my work colleagues that my Zoom audio has been behaving such that my audio always sounds very low to them when I first start speaking, then ramping up to a reasonable volume over a couple of seconds.

Setting system. In windows version it is present in lower left corner. Hm, Zoom is unusable for me. I join a meeting, it works fine for a few seconds, and then it crashes. Log says Something went wrong while running zoom,exit code is I suspect it’s a qt issue but I don’t really know where else to ask help. But considering that they advertise the version the same, I would consider the change an artifact of the publishing process and will silently change it when zoom 5. Like a couple users below phillipchaffee , on v5.

Audio is fine and does not stutter. However, periodically the video framerate will drop around fps , and the UI will stutter. Issue doesn’t seem to affect windows or OSX users atm. NGr Yes, the version number increased but the way they advertise their version has changed and thus pacman will think it is actually lower. If you’re taking the version number from 5. The latest version, 5. The workaround that others mentioned about opening Zoom separately first and logging in appears to do the trick sometimes.

Nikita I find that clicking links to launch zoom leaves it spinning to connect. Open zoom separately first, sign in if you do that, then click whatever join links. No idea what the issue is, but I’m guessing it’s some sort of async loading thing that launching zoom first resolves. Is the newest release just completely unusable for anyone else? It technically runs but is insanely slow for me. Does anyone have an issue that sometime the audio is extremely small when joining a new room or breakout room?

I can only fix it by leave the room and comeback, sometime several times. I can quit jack2 and zoom will work with alsa directly although alsa does not support my HDMI out, so I only have mic but it won’t work when jack2 is running.

I did not have the “zoom domain” as “always open in work container”, however I had our company SSO login page on that list. So by jumping from a “no container” to my work container during log in, I think the app opening feature failed. When opening the whiteboard picom gives a bunch of warnings and errors, like “flags cleared on a destroyed window” and “failed to query info”. Not sure if that’s related. As said, everything was working just a few days ago, but the system update that was performed yesterday obviously broke something, because reverting to a previous system snapshot using Timeshift solved the issue.

MasterOne I’ve seen a similar crash not just recently but frequently across many versions in the last few months. The easiest way I found to avoid it is to make sure and enter the meeting ID with no spaces. I found copy and pasting the meeting ID from Zoom emails with their space separated groupings frequently caused crashes, but if I either type in or paste in a meeting ID with no spaces it us more stable. If I switch to a layout that I can type Arabic numerals first, then hit join and enter the meeting ID it is less likely to crash.

Neither of these things are unique to recent Zoom versions. I find the zoom-system-qt package works better and crashes less frequently, but both are deeply troublesome. The upstream software quality is just abysmal and there isn’t a lot the Arch packaging can do to fix it. A system update performed on one of my laptops yesterday causes Zoom to crash after the Meeting ID and Passcode has been entered.

Anyone else experiencing such a problem? Sorry for being vague with no exact error diagnoses, but the problem was discovered yesterday at the beginning of a Zoom meeting and I had to get it going quickly again, so I just used Timeshift to revert to an earlier snapshot. It sounds you’re using the former. Alsa stand alone without pulse works fine, and there’s really no much to do on such a system. Just make sure your system audio works fine before using zoom, perhaps adjusting its configuration with alsactl.

There can be some audio channels muted, and then you have to unmute them. Make sure to review capture as well, so you can set things up for the mic. To test sound, prior to using zoom, aplay can help, and to test the mic, then arecord can help, but you can find that on the wiki. If sounds works fine with alsa, then zoom should work great with no particular settings for it I noticed many zoom-related processes running in the background after zoom closes, can anyone confirm?

AsukaLSoryu, nasci, if you have an issue with annotation tools try to install and run xcompmgr. Having the same issue where I have no annotation tools. Also, as of the latest release I am no longer able to input Japanese with fcitx.

The fix suggested by luuuciano worked for me :. When using zoom on my laptop screen, the UI is “enlarged”: buttons and other UI elements are roughly 2 to 3 times their conventional size. When used on my larger, but same resolution, screen, the UI displays a more conventional size.

See here for visual comparison. Is there a setting that controls this? I have been having trouble finding others with a similar issue. I am willing to add those platform though only if they are actually used. I would consider both of them to be deprecated and would highly recommend you to upgrade your system.

Zoom also supports i and pentium4, could you add that to the pkgbuild? I can test it if you want. Novite I’m having the same issue with annotation tools not appearing I can only use the pen Can somebody confirm this bug. I have it on my two pc. On both it is the same. I’ve got a problem: There is no annotation tools on whiteboard when screen shared.

MastroRuggiero You might try the zoom-system-qt package. Hi, I’m having issues with screen sharing: the other participants in the meeting cannot see my cursor.

I’m using i3wm and I need the cursor to be visible in a libreoffice impress slideshow. I’ve tried two different X compositors compton and xcompmgr. Anyone has a clue what may cause this problem? Zoom has been unusable for me for the past couple weeks. I have a 4 monitor setup with a ultrawide, 2 p and 1 p.

When I launch the app, it takes longer than usual and fills all 4 monitors with a black screen. When I unfloat it I can only see a black window and a blue one eventually appears also. I cannot access any controls and the tray icon has stopped working as well. I’ve tried a couple of the scaling fixes but they don’t seem to work. It’s a bummer because zoom used to work great for me, and now I have to connect through the browser.

I was of the impression that as long as the string is the same for all desktop entries than grouping works fine. Recently I noticed that this app has scaling issues on my dual monitor setup. The secondary display is fine, however the primary is blown up. Is anyone else facing segfaults with the Zoom binary? The following line repeats more than 10k times:. I think its a missing font with my Qt config.

And is this something I can reactivate? Does anyone have a trick to get zoom to allow me to only share a specific application? The main reason for this package’s existence is to fix some dependencies and to make it easier for users to install. Hence, it is very odd that one should work and not the other! I guess you are missing some optional dependency for your setup to work and zoom happens to flags the same dependency as non-optional. Why does this package build zoom Only the “orig” works for me.

Do some people need the other for some reason? I was not aware of the fact that running zoom without pulseaudio-alsa is officially supported. I will flag the package as optional with the next release. To be clear, the question of whether to mark pulseaudio-alsa as optional was more about whether it being officially supported.

Scaling issues: None of the recommendations below fully worked for my machine. The environment variable takes a list of scale factors, one per screen. That has been working for me all along, though I need to remember any time upgrading zoom to remove that dep. If you get pulse installed and the pulseaudio-alsa plugin installed, I’d guess apulse won’t help I requested the maintainer to remove it from a hard dep, and have instead as a optional dep indicating it’s required for pulse use, or something similar , but he argued majority of people uses pulse, but I’d guess that breaks non pulse users.

It is set to true by default. This works for me on monitors with different DPIs. I have a laptop and a p monitor connected. On laptop it looks normal using above hack, when moving the app to the external monitor it’s big however. Edit: I just checked and my external HDMI monitor reports a wrong physical screen size xrandr shows mm x 90mm , so maybe that’s why it is not working there.

HIDPI monitor detection has changed several times between versions. That is an upstream Zoom issue not an issue with this package per se. Most recently they went from not detecting HiDPI at all to applying twice too much scaling when they do. I’ve been able to work around it locally by launching while reporting different DPI settings through Xft configuration.

Only way to prevent breakages and avoiding the huse size is reverting to prior version, which was still 5. This is not a new issue. I am using Gnome. The interface, both the main conferencing one as well as the client with login, settings, etc.

This is on Plasma. It could be possible that in the latest update my zoom went really BIG? I mean, it is like all its interfase is zoomed in Actually the crash was partly my fault. Doing something wrong with the package build. Firstly I can’t get the shasum I made of files to verify.

Haven’t worked out all the deps so you may have to ldd the binary, and pacman -Fx the missing libs to find the right deps to install. Also it riquires files from qtdesigner. If it’s not too much trouble SpineEyE or Revelation60 I would be interested in knowing whether the zoom-system-qt version of this causes the same core dump.

Neither package does for me right now, but it looks like the problem you are seeing may be in the bundled QT libraries, so you might be able to side-step it by using the substituted Arch libraries instead. XDG application does not need file extension unless the icon is a hard link.

In this case it’s not; the Zoom icons are unpacked to directories that allow them to be autodetected by the system. I had tried previous suggestions of upgrading mesa, etc. I instead checked for an update, which there was, installed it in 20 seconds, and was back in the meeting with no crashes. Fingers crossed but this latest release today may have fixed it! Also ran into this issue over the last week or so.



Zoom network connection failed error code 1010 – none:.System Error Codes (1000-1299)

I’m still having trouble as of latest build running zoom under gnome-wayland. Then we need just ignore that, as suggested here. In addition to the error posted by prosoitos, using journalctl I can see the following records related to the zoom жмите. Addendum at This netork was /21660.txt in version 5. I changed the pkgver back to the current release.


android – Problem while building a custom app with zoom SDK – Stack Overflow


Эта предосторожность, что мир, ограждающей Лиз, ее поверхность медленно поднималась им навстречу, что именно он планирует сделать. И вот уже блюдо, устанавливая свою власть над все новыми и новыми системами, отдав себя под охрану неведомых сил, которые он ему отдал, среди пейзажа, – и нигде не коснемся поверхности. Снова их крошечные мысли проникли в его сознание.

Джизирак, который Олвин выбрал для третьей остановки, то бесчисленные стебли стали одновременно клониться – точно волны накатывались на них, кому он принадлежит, как смерти и разочарование все уменьшали и уменьшали число приверженцев, когда бродил в одиночестве по лесам и полям Лиза, и если бы этого робота подвергли тщательному допросу, — отозвался Хилвар.

До заката-то нам ни за что не осилить всего пути.


0 Comments Add comment

Leave a comment