Damp Proofing and Water proofing Products

Deco Seal PU is a two component high gloss chemical and weather resistance top coat. 

Deco Seal PU demonstrates excellent abrasion resistance and weathering characteristics. 

Uses:

Deco Seal PU protects steel, concrete, wood and fiber glass surfaces which are exposed to corrosion and weathering conditions 

Deco Seal PU is UV stable and suitable for interior and exterior applications.

Advantages:

• Excellent color and gloss retention.
  
• Excellent abrasion resistance
  
• Excellent UV resistance
  
• High flexibility.
  
• Good corrosion resistance.
  

Technical Data Sheet:

Deco Seal-WB Acrylic Floor Sealer is a single component, water based acrylic resin solution which dries to form a clear, non-yellowing protective film over concrete, Terrazzo floors and other surfaces. 

Deco Seal-WB Acrylic Floor Sealer seals porous surfaces from moisture penetration, staining, wear and dirt pickup.

USES: 

To protect atmospherically exposed concrete structure from attack by acid gases, chloride ions, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry. It is suitable for use on all types of structures, including those in coastal environments. It is equally suitable for new and existing structures. 

The product is designed to re-face and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs and roots. The product provides a tough durable wear resistant coating which can withstand light pedestrian traffic.

ADVANTAGES:

• VOC compliant
  
• Non-yellowing
  
• Seals out moisture
  
• Stain resistant
  
• Easy application

Deco Guard is water based acrylic sealer designed to protect vertical concrete, masonry and stucco surfaces against moisture penetration.

Deco Guard repels water from properly-prepared surfaces and improves stain resistance, as opposed to untreated surfaces.

Deco Guard penetrates deep into the pores of concrete, binding sand and cement particles to form a tough, flexible yet breathable film.

Deco Guard strengthens mortar joints, reduces efflorescence on brick and acts as a color rejuvenator on older painted or colored surfaces.

USES:

Deco Guard can be used for the following applications:

• Top coat for all Decorete® Architectural Coatings 
  
• Sealer for masonry and concrete substrates. 
  
• Interior and exterior application. 
  

Deco Guard 290 is a silicon Solvent base water repellent mixture of silane /siloxane and synthetic resins. It is used to import both water repellency and oil repellency to inorganic substrates such as mineral constructions.

USES:

Deco Guard 290 protects masonry and other building materials against damage due to penetration by water and waterborne chemicals.

Deco Guard 290 is not a surface coating. It penetrates up to ¼ inch into treated surfaces and bonds with the substrate to provide long lasting, protection, even at hairline cracks.

Deco Guard 290 is used on neutral and alkaline mineral substrates such as:

• Brickwork
  
• Mineral-based natural and artificial stone
  
• Aerated concrete
  
• Sand-lime brickwork
  
• Cement fiberboards
  
• Mineral paints
  
• All kinds of concrete
  
• Mineral plasters 
  

Deco Guard 290 is suitable as primer for exterior paints.

ADVANTAGES:

• 100% vapor Permeable
  
• Good depth of penetration.
  
• High alkaline resistance.
  
• Effective even on damp substrates.
  
• Water repellency developes fast
  
• Allows substrate to breath
  
• Does not change the appearance of substrate
  
• Reduces efflorescence, scaling and spalling

Technical Data Sheet:

Deco Guard 390 is a water base water repellent mixture of silane and siloxane. 

Deco guard 390 serves as high quality, general-purpose water repellents for impregnating and priming mineral surfaces

Deco guard 390 reduces the capillary absorption, but does not clog pores or capillaries. There is therefore little or no impairment of the building material´s ability to “breathe”.
.
USES:

Deco Guard 390 is excellent water repellent for many absorbent mineral substrates, such as:

• Natural sand stone
  
• Brick
  
• Sand-lime brick
  
• Cement fiberboards
  
• Mineral plasters
  
• Fibrous cement
  

• Environment friendly 
  
• Good depth of penetration.
  
• High alkaline resistance.
  
• Effective even on damp substrates
  
• Allows substrate to breath
  
• Provides good adhesion for paints
  
• Reduces efflorescence, scaling and spalling

Deco Proof a two component acrylic polymer modified cementitious coating supplied in ready to mix kits.
Deco Proof can be simply applied by stiff brush, roller, spray or trowel to obtain the desired texture.
Deco Proof is suitable for both Concrete and asphalt.

USES:
To protect atmospherically exposed concrete structure from attack by acid gases, chloride ions, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry.

It is suitable for use on all types of structures, including those in coastal environments. It is equally suitable for new and existing structures. The product is designed to re-face and even out variations in concrete and masonry surfaces and bridge shrinkage cracks.

It provides a seamless, flexible waterproof coating suitable for water tanks, reservoirs and roots. The product provides a tough durable wear resistant coating which can withstand light pedestrian traffic.

ADVANTAGES:

• Excellent water proofing in both negative and positive pressure. 
  
• Allows water vapor to escape from the structure (breathable). 
  
• High resistance to the effects of long-term weathering, durable in all climatic conditions including UV attack.
  
• Minimum surface preparation needed and low labor costs. 
  
• Nontoxic ideal for potable water tanks. 
  
• Flexible with thermal expansion similar to concrete. 
  
• Covers honeycombed and pitted poured concrete effectively. 
  
• Excellent weather resistance for exterior applications and provides a decorative finish.